Filter
Top Products
About Your System | 27
Error Code Error Message Response
4108 Dram ECC requested but not enabled Pause
4109 Online spare requested but not enabled Pause
410A DIMM(s) Running in Minimum Mode Pause
410B No DQS Receiver Enable pass window found Pause
410C DQS Rcvr En pass window CHA to CH B too large Pause
410D DQS Rcvr En pass window too small (far right of
dynamic range)
Pause
4160 The processor(s) installed in your system are not
multiprocessing capable.
halt
5120 CMOS cleared by jumper Pause
5121 Password cleared by jumper Pause
8101 Warning! USB Host Controller not found at the
specified address!!!
Warning
8102 Error! USB device failed to initialize!!! Warning
8103 Warning! Unsupported UBS device found and
disabled!!!
Warning
8104 Warning! Port 60h/64h emulation is not supported
by this USB Host Controller!!!
Warning
8105 Warning! EHCI controller disabled. It requires
64bit data support in the BIOS.
Pause
8400 Warning!! Insufficient memory! Remote access is
disabled.
Warning
8601 Error: BMC Not Responding Pause
8701 Insufficient Runtime space for MPS data!!
System may operate in PIC or Non-MPS mode.
Pause