Filter
Top Products
Using the System Setup Program | 37
Option Description
Power Management
(OS Control default)
This field sets the System Power Management to
Maximum Performance mode, OS Control mode,
or Advanced Platform Management Link mode.
When set to APML mode, you can change
setting of PSU Power Capping options.
CPU Power Capping
(P-state 0 default)
This option can decide the highest performance
P-state in OS.
This setting only can be seen when “Power
Management” be selected to “OS Control” mode.
PSU Power Capping
(150 default)
The setting controls PSU Power, its range limited
in 150˜2000W. The value will send to BMC by
IPMI command and BMC will control PSU
power.
This setting only can be seen when “Power
Management” be selected to “APML” mode and
the system board at location 4 in the chassis.