Filter
Top Products
CAUTION: To prevent damage to the processor pins when replacing a faulty system
board, ensure that you cover the processor socket with the processor protective cap.
l. memory modules and memory module blanks
m. network daughter card
Steps
1. Disconnect the mini SAS cable from the system board.
2. Disconnect all cables from the system board.
CAUTION: Take care not to damage the system identification button while removing the
system board from the chassis.
CAUTION: Do not lift the system board by holding a memory module, processor, or other
components.
3. Hold the system board holder, lift the blue release pin, lift the system board, and then slide it toward
the front of the chassis.
Sliding the system board toward the front of the chassis disengages the connectors from the back of
the chassis slots.
4. Lift the system board out of the chassis.
114