Filter
Top Products
iDRAC6 and CMC Property Database Group and Object Descriptions 181
FILE LOCATION:
C:\Working\ProjectDocs\Program_Releases\iDRAC6\iDRAC6_1.95_3.5\RACADM\Source\rac
DELL CONFIDENTIAL – PRELIMINARY 3/26/13 - FOR PROOF ONLY
cfgSsnMgtTelnetIdleTimeout (Read/Write)
NOTE: If 0 (no timeout), the network connection does not send keep alive packets
to probe the client. Otherwise, keep alive packets are sent to guarantee that the
client is responding.
cfgSerial
This group contains configuration parameters for iDRAC6 or CMC services.
One instance of the group is allowed.
NOTE: Use this object with the config or getconfig subcommands.
NOTE: To use this object property for CMC, you must have Chassis Configuration
Administrator privilege.
Description Defines the Telnet idle timeout. This property sets the amount of
time in seconds that a connection is allowed to remain idle (there is
no user input). The session is cancelled if the time limit set by this
property is reached. Changes to this setting do not affect the
current session (you must log out and log in again to make the new
settings effective).
An expired Telnet session displays the following error message:
• In case of iDRAC6 on Rack and Tower Servers:
Connection timed out
• In case of iDRAC6 Enterprise on Blade Servers:
Session timed out. Closing the session...
After the message is displayed, the system returns you to the shell
that generated the Telnet session.
Legal Values 0 (No timeout)
0– 10800
For CMC: 60 – 10800
Default For iDRAC6 on Rack and Tower Servers: 300
For iDRAC6 Enterprise on Blade Servers and CMC: 1800