Filter
Top Products
74 RACADM Subcommand Details
racadm getled -m server-9
<module> <LED state>
server-9 Extension(1)
getmacaddress
NOTE: To use this subcommand, you must have CMC Login User privilege.
Synopsis
racadm getmacaddress [-m <module>] [-t iscsi] [-x]
racadm getmacaddress [-a]
Table 2-17 describes the getmacaddress subcommand options.
Subcommand Description
getmacaddress Displays the MAC/WWN addresses for all modules or for a
specified module.
Table 2-17. getmacaddress Subcommand Options
Option Description
-m <module> Specifies the module whose MAC address you want to view.
<module> may be one of the following:
• chassis
•
server-n
where
n=
1–16
•
switch-n
where
n
=1–6
-t Displays the iSCSI MAC addresses for all servers or the specified
server if used with -m option.
-x Displays the extra MACs (Ethernet or iSCSI) for servers with
additional LOM MACs and must be used with -m option.
-a Displays the Ethernet and iSCSI MAC/WWN addresses for all
iDRAC/LOMs/mezzanine cards. When FlexAddress is enabled for a
particular slot, then the chassis-assigned MAC/WWN address is
displayed.