Filter
Top Products
86 Configuration: About Your Host
• Change the host port identifier alias or user label.
• Move or associate a host port identifier to a different host.
• Replace a host port identifier with a new host port identifier.
• Manually activate an inactive host port so that the port can gain access to
host specific or host group specific LUN mappings.
• Change the host port type to another type.
• Move a host from one host group to another host group.
• Remove a host group, a host, or a host port identifier.
• Rename a host group or a host.
Using the Mappings Tab
In the Mappings tab, you can:
• Define hosts and hosts groups
• Add mappings to the selected host groups
For more information, see the PowerVault Modular Disk Storage Manager
online help topics.
Defining a Host
You can use the Define Host Wizard in the AMW to define a host for a
storage array. Either a known unassociated host port identifier or a new host
port identifier can be added.
NOTE: A user label must be specified before the host port identifier may be added
(the add button is disabled until one is entered).
To define a host:
1
In the AMW, select the
Mappings
tab and select the appropriate storage
array.
2
Perform one of the actions:
• Select
Mappings
Define
Host
.
• Select the
Setup
tab, and click
Manually Define Hosts
.
book.book Page 86 Tuesday, September 27, 2011 3:25 PM