Filter
Top Products
Installing System Components 113
c
Unlatch the fan assembly and lift it far enough out of the chassis to
route the SAS cable along the inside of the chassis, underneath the
plastic retention clip. Replace the fan assembly and close the latches.
See Figure 3-14, "Removing a Cooling Fan," and "Replacing a Cooling
Fan."
d
Attach the connector labeled "SAS A" to connector SAS A on the
backplane, and attach the connector labeled "SAS B" to connector
SAS B on the backplane. See Figure 3-17.
Figure 3-17. Installing the Integrated Storage Controller Card
5
Close the system. See "Closing the System."
1 SAS data cable connector 2 integrated storage controller card
3 back card edge guide (black) 4 expansion card riser 1
5 front card edge guide (blue) 6 RAID battery connector (PERC only)
7 SAS data cable 8 cable retention clip
1
3
2
4
6
5
7
8