Filter
Top Products
160 Running the System Diagnostics
• Temporarily suspend testing if an error is detected or terminate testing
when a user-defined error limit is reached.
• View help messages that briefly describe each test and its parameters.
• View status messages that inform you if tests are completed successfully.
• View error messages that inform you of problems encountered during
testing.
When to Use the System Diagnostics
If a major component or device in the system does not operate properly,
component failure may be indicated. As long as the microprocessor and the
system's input/output devices are functioning, you can use the system
diagnostics to help identify the problem.
Running the System Diagnostics
The system diagnostics program is run from the iDRAC6 Express System
Services menu.
CAUTION: Use the system diagnostics to test only your system. Using this
program with other systems may cause invalid results or error messages.
1
As the system boots, press <F10>.
2
Select
Diagnostics
from the System Services menu.
3
Select
Launch Diagnostics
.
4
From the
Diagnostics
main menu, select
Run Diags
, or select
MpMemory
if you are troubleshooting memory.
The Diagnostics menu allows you to run all or specific diagnostics tests or to
exit.