Filter
Top Products
42 Installing System Components
Inside the System
In Figure 3-1, the system cover is opened to provide an interior view of the system.
Figure 3-1. Inside the System
The system board can accommodate two processors, five expansion cards, and four memory modules.
The rotatable hard-drive carrier provides space for up to two SAS or SATA hard drives. Drive bays in the
front of the system provide space for an optical drive; an optional diskette drive or third hard drive; and
an optional tape drive, second optical drive, or fourth hard drive. A controller expansion card is required
for SAS hard drives or for more that two SATA hard drives. The optional third hard drive requires a
mounting screw kit. The fourth hard drive requires a special drive carrier for installation. Power is
supplied to the system board and internal peripherals through a single nonredundant power supply.
1 5.25-inch drive bays (2) 2 drive cage 3 power supply
4 system board 5 memory fan 6 hard drives (2)
7 rotatable hard-drive carrier 8 front fan 9 expansion-card fan
10 flex bay
3
2
4
1
10
9
8
7
6
5
book.book Page 42 Monday, June 5, 2006 1:51 PM