Filter
Top Products
Installing System Components 45
Figure 3-3. Rotatable Hard-Drive Carrier Retention Mechanism
5
Press down against the card retention mechanism until it clicks into place, locked against the hard-
drive carrier.
6
Grasp the handle on the hard-drive carrier and rotate the carrier out of the chassis. See Figure 3-4.
Rotate the carrier approximately 180 degrees from its original position, as shown in Figure 3-1, but do
not force it any further.
1 P3 power connector 2 card retention mechanism 3 release tab
1
2
3
book.book Page 45 Monday, June 5, 2006 1:51 PM