Filter
Top Products
Appendix 179
Appendix
Overview
NOTE: Your operating system may automatically configure most of the options
available in the system setup program, thus overriding options that you set through
the system setup program. (An exception is the Fn Key Emulation option, which you
can disable or enable only through the system setup program.) For more information
on configuring features for your operating system, access the Help and Support
Center (see "Microsoft Windows XP and Windows Vista Help and Support Center"
on page 16).
You can use the system setup program as follows:
• To set or change user-selectable features—for example, your computer
password
• To verify information about the computer's current configuration, such as
the amount of system memory
After you set up the computer, run the system setup program to familiarize
yourself with your system configuration information and optional settings.
You may want to write down the information for future reference.
The system setup screens display the current setup information and settings
for your computer, such as:
• System configuration
• Boot order
• Boot (start-up) configuration
• Basic device-configuration settings
• System security settings
NOTE: Unless you are an expert computer user or are directed to do so by Dell
technical support, do not change the system setup settings. Certain changes might
make your computer work incorrectly.
book.book Page 179 Monday, April 14, 2008 4:23 PM