Denso BHT-7500W Barcode Reader User Manual


 
80
If any error occurs, the BHT beeps three times and
shows the screen at left.
In parentheses are error codes which have the
following meanings:
(
X X)
1: The received data is different from
the sent data.
2: A timeout has occurred during
standby for data reception.
1: 300 bps
2: 115200 bps
Testing the direct-connect interface port
Selecting the "2:CONNECTOR" on the TEST COM-
MUNICATION menu displays the screen shown at
left and then starts testing the direct-connect in-
terface port.
Upon normal completion of the test, the tested
slave BHT beeps once and shows the screen at
left.
Press the C key to return to the TEST COMMUNI-
CATION menu.
The master BHT will automatically return to the
TEST COMMUNICATION menu.
TEST COMMUNICATION
< OPTICAL >
** Test OK **
TEST COMMUNICATION
< CONNECTOR >
** Testing **
TEST COMMUNICATION
< CONNECTOR >
** Test NG **
(XX)
Press the C key to return to the TEST COMMUNI-
CATION menu.