Denso BHT-7500W Barcode Reader User Manual


 
74
[ 5 ] Testing
Selecting "5:TEST" on the SYSTEM MENU calls up
the screen shown at left.
1 BARCODE : Selects the bar-code reading test.
2 MEMORY : Selects the RAM read/write test.
3 BEEPER : Selects the beeper scale test.
4 AGING : Selects the aging test.
5 COMMUNICATION
: Selects the communications test.
6 LCD : Selects the LCD and indicator LED
tests.
7 KEY & VIBRATION
: Selects the key entry, beeper and
vibrator tests.
8 FILE : Selects the file checksum test.
9 PING : Selects PING.
Select a desired setting by using the numerical
keys or
and keys, and then press
the ENT key. The selected test will start.
Highlighted is the currently selected item.
To return to the SYSTEM MENU, press the C key.
If an error occurs in any of the above tests, contact your nearest dealer.
TEST
1:BARCODE
2:MEMORY
3:BEEPER
4:AGING
5:COMMUNICATION
6:LCD
7:KEY & VIBRATION
8:FILE
9:PING
("9:PING" supported by the
BHT-7500S/7500W only)
(BHT-7500S/7500W only)