Denso BHT-7500W Barcode Reader User Manual


 
148
System Program malfunction
Problem
During execution of System Program, the System
Program has attempted to write onto the write-pro-
tected area of the memory.
(xxxxxxxx: Error address)
If this error occurs, the BHT beeps five times
(for 0.1 second per beep).
Solution
Unload and reload the battery cartridge, then turn
on the power.
Problem
During execution of System Program, the System
Program has received an invalid command code.
(xxxxxxxx: Error address)
If this error occurs, the BHT beeps five times
(for 0.1 second per beep).
Solution
Unload and reload the battery cartridge, then turn
on the power.
XXXXXXXX 01
Reload the battery
to restart!
tskid:XXXXXXXX
ercd :XXXXXXXX
addr :XXXXXXXX
02
Reload the battery
to restart!
Abnormally turned off last
Problem
After turned off abnormally*, the BHT had been
left with no battery cartridge loaded or with a dis-
charged battery cartridge loaded, so unsaved data
was lost.
(*"Normally turned off" refers to turned-off with
the PW key or by the auto power-off feature.)
Solution
Refer to Subsection 2.3.7 "BHT Turning-off Notes."
Your terminal was
not shut down
properly the last
time it was used.
Unsaved data
was lost.
[SF+2]