Denso BHT-7500W Barcode Reader User Manual


 
91
Chapter 2. Getting Started the BHT and System Mode
FTP MENU
1:DOWNLOAD
2:UPLOAD
DOWNLOAD FILE
SERVER IP:XXX.XXX.XXX.XXX
CURRENT DIRECTORY:
.../ABCD/EFGH/IJKL/MNOP/QR
ST/UVWX/YZ/0000/1111/22222
1:DIR/FILE
[ ]
2:FIELDS
[ ]
--------------------------
IP address of an FTP server you have specified
Current directory reserved
Entry box for a directory and/or file name
Entry box for field information of a data file to be
downloaded
Status message
[ 7 ] Downloading/Uploading by FTP (BHT-7500S/7500W only)
Selecting "7:FTP" on the SYSTEM MENU calls up
the screen shown at left.
1 DOWNLOAD : Downloads a file by FTP.
2 UPLOAD : Uploads a file(s) by FTP.
Select a desired item by using the numerical keys
or
and keys, and then press the ENT key.
To return to the SET SYSTEM menu, press the C
key.
[7.1] Downloading by FTP
Selecting "1:DOWNLOAD" on the FTP MENU calls
up the screen shown at left where the current set-
tings are displayed.
1 DIR/FILE : Specifies a directory and/or file
name. (For details, refer to the next
page.)
2 FIELDS : Specifies field information of a data
file. (For details, refer to the next
page.)
Select a desired item by using the numerical keys
or
and keys, and then press the ENT key.
The entry box of the selected item becomes ready
to accept entry and a cursor appears.
Enter the desired value by using the numerical
keys and period (.) key and then press the ENT
key.
Pressing the SF key switches the entry mode
between the numeric mode (without a guidance)
and alphabet mode.
In the entry mode, to delete a single character,
press the BS key ( SF + C keys). To delete the
whole entry you made, press the C key.
To return to the FTP MENU, press the C key when
any item is highlighted.