Denso BHT-7500W Barcode Reader User Manual


 
25
Chapter 2. Getting Started the BHT and System Mode
Switching the beeper & vibrator
You may choose any of three ways—beeping only, vibrating only, or beeping &
vibrating as a confirmation of completion of bar-code reading.
1) Use the
and keys to select the BEEPER VIBRATION line that will be
highlighted in any one of the following three states:
Adjusting the beeper volume
You can adjust the beeper volume to four levels from OFF to MAX.
1) Use the and keys to select the BEEPER VOLUME line.
2) To turn down the volume, press the
key; to turn it up, press the key.
Adjusting the LCD contrast
You can adjust the LCD brightness to eight contrast levels.
1) Use the or keys to select the LCD CONTRAST line.
2) To decrease the contrast, press the
key; to increase it, press the key.
2) Use the
and keys to highlight the desired way(s).
After making the above setting, press the ENT key or press no keys for five seconds,
and the new setting will be fixed and the above screen will disappear.