Filter
Top Products
106
BHT-7500W
INITIALIZE RF
Initialize Parameters?
1:Yes 2:No
Selecting the "4:INITIALIZE" on the RF parameter
menu calls up the screen shown at left.
To initialize the RF parameters, choose "1:Yes" and
press the ENT key. Initialization will start with the
"** Initializing **" displayed. After completion of
initialization, the screen returns to the RF param-
eter menu.
To cancel initialization, choose "2:No" and press
the ENT key. The screen will return to the RF
parameter menu.
When the "** Initializing **" is displayed,
the initialized data will be written onto the
EEPROM of the wireless module built in the
BHT-7500W.
While this message is displayed, do not turn
the BHT off. Writing halfway onto the
EEPROM will not bring any assured settings.
Initialization will not initialize WEP keys.
[8.1.4] RF parameter initialization screen