Filter
Top Products
DI-304/DI-304M ISDN Remote Router
Checking the Network IP Configuration
The following explains how to setup the Transmission Control Protocol/ Internet
Protocol (TCP/IP) in Windows 95/98. For more detailed information on TCP/IP
setup, refer to the Windows 95/98 help files. For other operating systems refer to the
user manuals.
1. On the desktop, right-click Network Neighborhood. Click Properties. The
Network window will open:
Your particular system may differ from the window shown here. Check if you have
an Ethernet Network Interface card (NIC) installed. If not, refer to the installation
documentation from the NIC card manufacturer and install the card and drivers.
If you have installed the NIC card,
1. Click the Add button. The Select Network Component
Type dialog box will open. This box has four options: Client, Adapter,
Protocol, and Service.
2. Select Protocol and click the Add button. The Select Network Protocol
dialog box will open.
3. Select Microsoft in the left scrolling window, then select TCP/IP on the
right, and click OK. It will return to the Network dialog box.
14