DI-304/DI-304M ISDN Remote Router
ISP Access Setup
♦ ISP Name – Enter the ISP name.
♦ Username – Enter the ISP supplied username.
♦ Password – Enter the ISP supplied password.
♦ Scheduler (1-15) – Enter up to 4 index numbers for calls that have been
previously configured on the Call Schedule Setup windows (under
Advanced Setup).
ISDN Dial Backup Setup
♦ Dial Backup Mode –There are three options:
◊ None - Disable the backup function.
◊ Packet Trigger - The backup line is disconnected until a packet
from a local host triggers the router to establish a connection.
◊ Always On - If the broadband connection is no longer available,
the backup line will automatically connect and stay Always On
until the broadband connection is recovered.
PPP/MP Setup
♦ PPP Authentication – Select PAP or CHAP for widest compatibility.
♦ Always On - If the broadband connection is no longer available, the
backup line will automatically connect and stay Always On until the
broadband connection is recovered.
♦ Idle Timeout – Idle timeout means the router will disconnect after being
idle for a preset amount of time. The default is 180 seconds. If you set the
time to 0, the PPP session will not terminate itself.
♦ Fixed IP – Check No (Dynamic IP) unless your ISP has provided you
with a static IP address.
♦ Fixed IP Address – If your ISP has provided you with a static IP address
enter it here.
IP Address Assignment Method (IPCP)
♦ Fixed IP – Check No (Dynamic IP) unless your ISP has provided you
with a static IP address.
♦ Fixed IP Address – If you ISP has provided you with a static IP address
enter it here.
Click OK.
34