Filter
Top Products
DSL-504 ADSL Router User’s Guide
29
IMPORTANT: For any changes to the Router’s configuration to take effect, you must
save the new settings to non-volatile ram by going to the Save Changes menu, and
initiating the saving procedure. It will then be necessary to restart the Router. See the
section entitled Save Changes.
Change User Name and Password
Before you configure the Router and connect to the WAN you should change the
user name and password you just used to access the web-based manager. You can
change these by clicking on the User Name and Password button in the main
menu.
User Name and Password Window
Use this window to change the User Name and Password used to access the
web-based manager. Type the new User Name and Old Password in their
respective fields. Type the New Password and confirm it in the Confirm New
Password field and click the OK button.
If you have forgotten your user name or password you can use the out-of-band
console manager to access this information. For details on how to use the console
manager to find the user name and password, see Chapter 7, Using the Console
Manager.