Filter
Top Products
DSL-504 ADSL Router User’s Guide
52
HyperTerminal Interface with new IP address
Now you must save the new IP address and restart the device. You can save the
new IP address by typing the command series config save and pressing Enter.
This will save the new IP address for the Router and store it in the device’s flash
memory. Next you need to restart the device. You can restart the Router either
by unplugging the power and plugging it in again, or by typing the restart
command. You may now disconnect the terminal emulator and access the device
using the web-based management interface for configuration. For more thorough
instructions on using the out-of-band console manager, see Chapter 7.