Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
88
Defining Bandwidth Settings
The Bandwidth Control Page allows network managers to define the bandwidth settings for a specified ingress interface.
1. Click QoS > Bandwidth Control. The Bandwidth Control Page opens:
Figure 4-2. Bandwidth Control Page
The
Bandwidth Control Page contains the following fields:
Field Description
Unit
Defines the stacking member for which the bandwidth parameters are displayed
From Port
Defines from which port number bandwidth settings are displayed.
To Port
Defines to which port number bandwidth settings are displayed.
No Limit
Defines if bandwidth limitation is assigned to the port. The field value options
are:
Enabled — Ensures no bandwidth limitations on the port. (This is the default
value).
Disabled — Disables no bandwidth limitations on the port. When disabled,
user can enter a limit value in the ingress Rate field.
Ingress Rate (3500-1000000)
The possible field range is 3500 – 1000000.
2. Define the Unit, From Port, To Port, No Limit and Ingress Rate fields.
3. Click
. The bandwidth settings are defined, and the device is updated.