Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
The
ACL Profile L2 ACL Tagged MAC Address Page contains the following fields:
Field Description
Source MAC Mask
Defines the range of source addresses relative to the ACL rules (0=ignore, 1=check).
For example, to set 00:00:00:00:10:XX, use mask FF:FF:FF:FF:FF:00.
Destination MAC Mask
Defines the range of destination addresses relative to the ACL rules (0=ignore,
1=check).
For example, to set 00:00:00:00:10:XX, use mask FF:FF:FF:FF:FF:00.
2. Select Source MAC Mask and/or Destination MAC Mask. The Mask Generate button is active.
3. Enter a MAC mask in the box adjacent to the Mask Generate button.
Alternatively, click
. The Generate Mask by range fields appear.
Enter a MAC address range into the Generate Mask by range fields, and click
. The mask is
generated.
4. Click
. The ACL profile is added, and the device is updated.
To define L2 802.1Q VLAN ACL profile:
1. Click the 802.1Q VLAN button. The
ACL Profile L2 ACL Tagged VLAN Page updates to show the following:
Figure 8-6 ACL Profile L2 ACL Tagged VLAN Page
The
ACL Profile L2 ACL Tagged VLAN Page contains the following fields:
Field Description
802.1p
Sets the 802.1p field as an essential field to match.
VLAN VID
Sets the VLAN VID field as an essential field to match.
2. Define the 802.1p and VLAN VID fields.
3. Click
. The ACL profile is added, and the device is updated.
147