Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
158
To change ACL rules:
1. Click
. The Add Access Rule Page opens:
Figure 8-21 Add Access Rule Page (IP based ACL)
The
Add Access Rule Page contains the following fields:
Field Description
Profile ID
Displays the Profile ID to which the rule is being added to.
Source ID
Displays the source IP address
TCP Source Port
Displays The TCP Source Port
TCP Flag Mask
Indicates if TCP flag mask is active.
Access ID
Defines the Access ID
Type
Displays the profile type (IP based).
Source IP Address
Displays the source IP address.
TCP Flag
Defines the indicated TCP flag that can be triggered.
Source Port
Displays the TCP source port.
Ports
Defines the ports on which the access profile will work.
Action
Defines the action to be taken The possible values are:
Permit — Forwards packets if all other ACL criteria are met.
Deny — Drops packets if all other ACL criteria is met.
Rate Limiting — Rate limiting is activated if all other ACL criteria are met.
Change 1P priority — VPT (CoS) value is changed if all other ACL criteria is met.
Replace DSCP — Reassigns a new DSCP value to the packet if all other ACL
criteria are met.