Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
70
Field Description
16711450 seconds.
Host Timeout
Defines the time the host waits to receive a message before timing out. The
default time is 260 seconds. The field range is 60-16711450 seconds.
Router Timeout
Defines the time the Multicast router waits to receive a message before it
times out. The default value is 300 seconds. The field range is 1-16711450
seconds.
State
Indicates if IGMP snooping is enabled on the VLAN. The possible field
values are:
Enable — Enables IGMP Snooping on the VLAN.
Disable — Disables IGMP Snooping on the VLAN. (This is the default
value).
Static Router Port Setting (Edit button)
Displays the Static Router Ports Settings Page.
Multicast Entry Table (View Button)
Displays the Multicast Entry Table.
2. Click
. The Static Router Ports Settings Page opens:
Figure 3–12. Static Router Ports Settings Page
The
Static Router Ports Settings Page contains the following fields:
Field Description
VLAN ID
Specifies the VLAN ID
VLAN Name
Displays the user-defined VLAN name.
Leave Timer
Defines the time a host waits to receive a Join message from another station after
requesting to leave the IGMP group, prior to timing out. If a Leave Timeout occurs,
the switch notifies the Multicast device to stop sending traffic The Leave Timeout
value is either user-defined, or an immediate leave value. The default timeout is 10
seconds. The field range is 0-16711450 seconds.