Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
90
3. Click
. The storm control settings are configured, and the device is updated.
Mapping Ports to Packet Priorities
The 802.1P Default Priority Page provides traffic classification. by assigning priority values per port. The priority value is
assigned when packet arrives to a port with an empty priority tag.
1. Click Qos > 802.1p Default Priority. The 802.1P Default Priority Page opens:
Figure 4-4. 802.1P Default Priority Page
The
802.1P Default Priority Page contains the following fields:
Field Description
Unit
Defines the stacking member for which the port packet priorities are displayed.
From Port
Defines the starting port for which the port packet priorities are defined.
To Port
Defines the ending port to which the port packet priorities are defined.
Priority
Defines the priority assigned to the port. The field range is 00-07, where 00 is the lowest
priority and 07 is the highest priority.
2. Define the Unit, From Port, To Port, Prioirity fields.
3. Click
. Ports are mapped to packet priorities, and the device is updated.