Filter
Top Products
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
162
Notes about ‘IP’ and ‘MAC’ Based ACLs in the DGS-3100 Series
ACLs can be configured in DGS-3100 series via the WEB GUI in two ways: through the ‘ACL Configuration Wizard’
screen (by automatic creation of profile and rule) and through the ‘ACL Profile List’ page by manual creation of profiles
and rules.
By using the ‘ACL Configuration Wizard’ page the user can create simple ACLs in a simple way, after setting a rule via this
page, the system will create an ‘Access Profile’ and also an ‘Access Rule’ and will bind it to a port or a group of ports. Each
operation via the Wizard can create either MAC based ACL or IP based ACL, the user can’t combine both types of ACLs in
the same operation.
NOTE: Access Profile can be a MAC Access Profile or an IP Access Profile, when using the ACL
Conriguration Wizard, ‘IP’ or ‘MAC’ should be selected in the ‘From’ and ‘To’ dropdowns. When
using the ‘Access Profile List’ page, after clicking: ‘Add Access Profile’, the user can choose
wether to create ‘L2 ACL’ (MAC) or ‘L3 ACL’ (IP).
• The user can set IP based ACL and MAC Based ACL on the same port(s) is the following: way:
– Go to ‘Add Access Profile’ page.
– Add L2 Access Profile with the desired fields.
– Add L3 Access Profile with the desired fields.
– Go to ‘Access Rule List’ page, create rules for both profiles and apply it on the same port(s).
Now you have on the port(s) IP Based ACL and MAC Based ACL.
NOTE: Adding rules to specific profile will have a unique Access ID in the range 1-240.
When the user is adding a rule to different profiles he can’t use the same Access ID for different
rules.