D-Link TM-G5240 Network Router User Manual


 
T-Mobile TM-G5240 Wireless Router User Manual
Version 0.7 041807
8
Getting Started
What you need before installing the TM-G5240
Before you install and use the TM-G5240, you must have:
Broadband Internet access
(a cable or DSL-subscriber line into your home or office)
NOTE: Consult with your Cable or DSL provider for proper installation of the modem.
Computer with Windows, Macintosh*, or Linux-based operating system with an
installed Ethernet adapter.
*
The CD wizard is not compatible with Mac/Apple computers (See page 10).
Internet Explorer Version 6.0 or Netscape Navigator Version 6.0 or above
Other installation considerations
The TM-G5240 lets you access your network, using a wireless connection, from virtually
anywhere within its operating range. Keep in mind, however, that the number, thickness
and location of walls, ceilings, or other objects that the wireless signals must pass
through, may limit the range. Typical ranges vary depending on the types of materials
and background RF (radio frequency) noise in your home or business. The key to
maximizing wireless range is to follow these basic guidelines:
Each wall or ceiling can reduce your TM-G5240’s range from 3-90 feet (1-30
meters). Position the TM-G5240 so that the number of walls or ceilings is
minimized.
Be aware of the direct line between network devices. A wall that is 1.5 feet thick
(.5 meters), at a 45-degree angle appears to be almost 3 feet (1 meter) thick. At a
2-degree angle it looks over 42 feet (14 meters) thick! Position devices so that the
signal will travel straight through a wall or ceiling (instead of at an angle) for better
reception.