Filter
Top Products
T-Mobile TM-G5240 Wireless Router User Manual
Version 0.7 041807
10
Configuring
TM-G5240
Configure the TM-G5240
The configuration of the TM-G5240 involves the following:
1. The Installation Wizard walks you through the steps to physically connect the
hardware components (computer, TM-G5240, modem, cables).
Note: The CD wizard is not compatible with Mac/Apple computers. Please use the
step-by-step image instructions (steps 1 – 9) provided on pages 12 through 15
in this User Manual, or the steps outlined in the QIG.
2. After connecting the hardware, the Wizard walks you through the configuration steps
for the TM-G5240.
Note: The CD wizard is not compatible with Mac/Apple computers. For Mac/Apple
users, once the cabling instructions are completed:
a. Open an Internet browser, i.e. Safari, Fire fox, etc.
b. Type in 192.168.0.1 in the address bar.
c. When asked for password, type in “admin” in the password field and leave
the user name field empty.
d. Click “Setup Wizard” to continue with the configuration process.
3. After configuring the TM-G5240, you will see Congratulations. At this point either go
to your phone to connect to your network or you can choose Security Settings on the
bottom left of the install screen to enable encryption.