D-Link TM-G5240 Network Router User Manual


 
T-Mobile TM-G5240 Wireless Router User Manual
Version 0.7 041807
76
I want to modify TM-G5240 settings
To modify settings, you must log on to the TM-G5240:
1. Open your Web browser and type the IP address of the TM-G5240 in the address
bar. The default IP address is 192.168.0.1. You are prompted for your password.
2. Type your password. Default password is admin.
Reset to factory default setting
After you have tried other methods for troubleshooting your network, you may choose to
reset the TM-G5240 to the factory default settings. Perform the following to hard-reset the
TM-G5240 to factory default settings:
1. Ensure the router has power and the status lights are on.
2. Locate the Reset button on the back of the TM-G5240.
3. Use a paper clip, press and hold in the Reset button.
4. Hold for about 10 seconds, until the status lights flash off, then release.
5. When the status lights are all back on the router is fully reset.
After the TM-G5240 resets (may take a few minutes), it will be reset to the factory
default settings.
Reset button