Filter
Top Products
T-Mobile TM-G5240 Wireless Router User Manual
Version 0.7 041807
63
Tools > Misc
At the Tools > Misc tab, you can adjust:
• Ping Test – The Ping Test is used to send Ping packets to test if a computer is on
the Internet. Enter the IP Address that you wish to Ping, and click Ping.
• Restart Device – Click Reboot to restart the TM-G5240.
• Block WAN Ping – If you choose to block WAN Ping, the WAN IP Address of the
TM-G5240 will not respond to pings. Blocking the Ping may provide some extra
security from hackers.
o Discard Ping from WAN side – Click Enabled to block the WAN ping.
• UPNP – To use the Universal Plug and Play feature click on Enabled. UPNP
provides compatibility with networking equipment, software and peripherals of the
over 400 vendors that cooperate in the Plug and Play
•
Gaming Mode – Gaming mode allows a form of pass-through for certain Internet
Games. If you are using Xbox, Playstation2 or a PC, make sure you are using the
latest firmware and Gaming Mode is enabled. To utilize Gaming Mode, click