Filter
Top Products
3-6
EMC CLARiiON Server Support Products for Windows Installation Guide
Installing and Using the Navisphere Host Agent or Server Utility
5. Select Navisphere Host Agent.
6. In the Navisphere Agent Setup dialog box, click Next at the
Welcome screen.
7. In the License Agreement dialog box, read the license agreement,
and click Yes to accept the terms.
8. In the Customer Information dialog box, enter the appropriate
information, and click Next.
9. In the Choose Destination Location dialog box, click Next to
select the default location.
When you are prompted about using the Microsoft iSCSI Initiator,
click Yes if Microsoft iSCSI Software Initiator is installed on the
server.
Depending on your operating system, the default location is one
of the following:
• On Windows Server 2003 (32-bit) or Windows 2000 systems
drive:\Program Files\EMC\Navisphere Agent
• On Windows Server 2003 (64-bit) systems
drive:\Program Files (x86)\EMC\Navisphere Agent
The setup program copies files to the destination folder, and then
it displays the message
Navisphere Agent Service installed successfully.
10. In the Navisphere Agent Installer dialog box, click OK.
The Initialize Privileged User List dialog box opens so you can
add privileged users to a new or existing Host Agent
configuration file.
If a filename does not appear in the Config File, a Host Agent
configuration file does not exist on the server, so continue to
step 11 to use the Create/Overwrite File option.
If a Host Agent configuration file exists on the server, go to
step 12 to use the Use Existing File option.
11. To create or overwrite a configuration file, do the following:
a. Click Create/Overwrite File.
b. Enter the pathname in Config File.
c. Skip to step 13.