Filter
Top Products
A-20
EMC CLARiiON Server Support Products for Windows Installation Guide
Silent Installations and Removals
Installing the Navisphere Server Utility
We recommend that you install the Navisphere Server Utility on all
attached Windows servers.
Important We do not recommend that you install Navisphere Server Utility
using the command line interface unless you are an advanced user. If you are
not, we recommend that you install the utility as described in Installing the
Navisphere Server Utility on page 3-14.
To perform a silent installation for the Server Utility follow the
procedure below.
Preparing for the installation
1. Log in to the Windows server as Administrator or someone who
has administrative privileges.
2. If the Server Utility is already installed, you must remove the
program you are updating, as described on page A-23 (command
line instructions). The installation program does not let you
overwrite an existing utility.
Important To perform a silent removal, all versions of the utility must be
running the same revision on each attached Windows server.
3. In the server’s drive, insert the server support CD that shipped
with your storage system or your upgrade kit (for AX-Series
systems upgrading to Navisphere Manager).
4. From the CD-ROM directory, navigate to the windows >
navi_server_utility folder or the windows >
AX100_server_utility folder.
5. Select the Navisphere_Server_Utility.exe file or the
Install_Navisphere_Server_Utility.exe file.
6. Click Next in the Navisphere Server Utility - Welcome dialog
box.