Filter
Top Products
Installing the Navisphere Host Agent
3-7
Installing and Using the Navisphere Host Agent or Server Utility
12. To use the existing configuration file, do the following:
a. Click Use Existing File.
The pathname of the file appears in the Config File.
b. If you want to use a different file, either enter the full
pathname of the file or select Browse to find the file.
13. Make sure the Privileged User List contains entries for only those
users allowed to configure storage systems connected to the
server.
You must specify at least one privileged user who can log in to the
Navisphere management station and configure the Host Agent. If you do
not specify a privileged user, an error message appears when you
attempt to exit this dialog box.
To add a user to the list:
a. Click Add.
The Add Privileged User dialog box opens.
b. In User Name, enter the person’s user account name.
c. In System Name, enter the name of the server running
Manager.
d. Click OK.
To remove a privileged user from the list:
a. Select the privileged user name.
b. Click Remove.
14. Click OK to save the new privileged user list and/or the new
configuration file.
The program saves the Host Agent configuration file with the
new privileged user entries and starts the Host Agent.
15. In the Navisphere Agent Setup dialog box, click Finish.
A command line window opens indicating that the Host Agent
service is starting.
16. If you are prompted to reboot the server, click Yes.
If you do not reboot before you run the Microsoft iSCSI Software
Initiator, the NIC initiators will not be able to login to the storage
system.