Filter
Top Products
System and Control Options
54
Enter a Pager Number
• From the Setup Pager Menu, choose Setup Pager Number for
the selected pager—Setup Pager 1 Number in the example at
right—and press Enter ↵.
• See Table 24 for guidelines on entering the pager number, which
may consist of up to 40 characters. To enter the pager number:
• Use the arrows
↑↓ to choose a character.
• Press Enter ↵ to advance to the next character position.
• When finished, press Enter ↵ again.
Enter a Pager PIN Number
• From the Setup Pager Menu, choose Setup Pager PIN, as shown
for Pager Number 1 in the example at right, and press Enter ↵.
• To enter the pager PIN, which may consist of up to 20 characters
(see Table 14 for valid characters):
• Use the arrows
↑↓ to choose a character.
• Press Enter ↵ to advance to the next character position.
• When finished, press Enter ↵ again.
Table 24 Guidelines for dialing pagers
Device type Required entries Example
Numeric
pager
The first character must be “N”. N18005551212
Alphanumeric
pager
The first character must be “A”. A18005551212
Remote
modem
The first character must be “M”. M18005551212
Device type Optional entries Example
All types
of devices
Use “9” if needed to access an outside
line—place after first character (N, A or M).
A918005551212
Use “W” to wait for a second dial tone
before dialing if the phone system has two
dial tones (initial tone and a second tone
for outside line)—place after “9” (before the
number to be dialed).
A9W18005551212
Use “,” (comma) to pause two seconds. N1,8005551212
Numeric
pager
Use “#” as the last character to terminate
page string if required by paging company.
N18005551212
,,,,1234567#
NOTE
For international dialing, you might need to add country codes
in the modem initialization string. See 7.8.1 - Modem Setup -
Initialization String.
Setup Pager Menu
> SET PAGER 1 NUMBER
SET PAGER 1 PIN
↑↓=NEXT
↵=SELECT
Pager # - Numeric
ENTER PAGER 1 NUMBER
N1,8005551212,,,,123
4567#
↑↓=SELECT
↵=NEXT/END
Pager # - Alphanumeric
ENTER PAGER 1 NUMBER
A9W18005551212
↑↓=SELECT
↵=NEXT/END
Setup Pager Menu
SET PAGER 1 NUMBER
> SET PAGER 1 PIN
↑↓=NEXT
↵=SELECT
Enter Pager PIN
ENTER PAGER 1 PIN
01234567891011121314
↑↓=SELECT
↵=NEXT/END