Filter
Top Products
PMC-CGM Installation and Use (6806800D53C)
Hardware Preparation and Installation Requirements
26
2. Check for damage and report any damage or differences to the customer service.
3. Remove the desiccant bag shipped together with the module and dispose of it
according to your country’s legislation.
2.2.2 Requirements
Before you power up the module, calculate the power needed according to your system
configuration.
2.2.2.1 Environmental Requirements
You must make sure that the board, when operated in your particular system configuration,
meets the environmental requirements specified below.
The product is thoroughly inspected before shipment. If any damage occurred during
transportation or any items are missing, please contact our customer's service
immediately.
Operating temperatures refer to the temperature of the air circulating around the board
and not to the component temperature.
Board Damage
High humidity and condensation on the board surface causes short circuits.
Do not operate the board outside the specified environmental limits. Make sure the
board is completely dry and there is no moisture on any surface before applying
power.