Filter
Top Products
cgmControl MIB Description
PMC-CGM Installation and Use (6806800D53C)
51
.1.1.2.1.35 bitsLiuRxLevel Receive level in dB
2.5 (0)
5.0 (1)
7.5 (2)
10.0 (3)
12.5 (4)
15.0 (5)
17.5 (6)
20.0 (7)
22.5 (8)
25.0 (9)
27.5 (10)
30.0 (11)
32.5 (12)
35.0 (13)
37.5 (14)
40.0 (15)
r
.1.1.2.1.63 bitsT1RxSync Resynchronization criteria.
In D4 framing mode:
- opt1 (0): search for Ft pattern, then search for Fs
pattern
opt2 (1): cross couple Ft and Fs pattern
In ESF Framing mode:
opt1 (0): search for FPS pattern only
opt2 (1): search for FPS and verify with CRC6.
Default value is (0).
r/w
.1.1.2.1.69 bitsT1TxYel Setting this object to on (1), causes the yellow
alarm to be transmitted.
Default value is (0).
r/w
.1.1.2.1.73 bitsT1TxB7zs Transmit-side bit 7 zero-suppression enable (bit 7
forced to a 1 in channels with all 0s)
Default value is (0).
r/w
.1.1.2.1.75 bitsT1TxFbCT1 Causes the next three consecutive Ft (D4 framing
mode) or FPS (ESF framing mode) bits to be
corrupted causing the remote end to experience a
loss of frame (loss of synchronization)
Default value is (0).
r/w
.1.1.2.1.80 bitsT1TaisCi Transmit AIS-CI
Setting this causes the AIS-CI code to be
transmitted, as defined in ANSI T1.403
Default value is (0).
r/w
Table 5-4 cgmBitsTable (continued)
OID MIB Object Description Access