Filter
Top Products
cgmControl MIB Description
PMC-CGM Installation and Use (6806800D53C)
53
The following table describes the elements of the cgmControl MIB branch
(OID:.1.3.6.1.4.1
.3656.8152.1.1).
.1.1.2.1.116 bitsTestPatternType Determines the type of the generated test pattern.
fixed(0) to use a pattern as defined in
bitsTestPattern / bitsTestPatternLength.
prbs11 (1)
prbs15 (2)
qrss20 (3)
Default value is (1).
Applies to the following line-type settings:
dsx1ESF
dsx1D4
dsx1E1
dsx1E1CRCMF
dsx1E1unframed
r/w
Table 5-5 cgmControl Elements
OID MIB Object Description Access
.1.1.10 cgmInterfaceMode Defines Sonet/T1 (0) or SDH/E1 (1) operation
mode for both BITS interfaces. Affects whether
an input frequency of 1544KHz (Sonet/T1) or
2048KHz (SDH/E1) can be selected for the
cgmInputFrequency object.
Default value is (1).
r/w
.1.1.15 cgmMasterSlaveShelfCombin
ation
Defines whether the master/slave combination is
on the same shelf (0) or on different shelves (1).
Note: only "same shelf" is supported.
Default value is (0).
r/w
.1.1.16 cgmMasterSlaveSync Defines the communication path to the protection
partner.
Default value is backplane (0).
r/w
.1.1.18 cgmProtectionRevertiveMode
State
When a clock module is in revertive operation
(0), it will always choose the highest priority valid
input.
When in nonrevertive operation (1), a selected
input will remain selected until it fails. The highest
priority valid input will be chosen at that point and
remain selected until it fails as well.
Default value is (1).
r/w
Table 5-4 cgmBitsTable (continued)
OID MIB Object Description Access