Filter
Top Products
Installing and Removing the Module Hardware Preparation and Installation
PMC-CGM Installation and Use (6806800D53C)
29
2.4 Installing and Removing the Module
The PMC-CGM can be installed on the PMC slot of the AdvancedTCA ATCA-F103 blade.
Table 2-3 Switch Settings
Switch Description
SW1-1 Reserved (OFF: default value)
SW1-2 Reserved (OFF: default value)
SW1-3 Restores default static IP addresses
OFF: Dynamic IP addresses are assigned by the ATCA-M100, for details
refer to Table "MIB Browser Settings" on page 37 (default)
ON: Static IP addresses are assigned
192.168.21.40: acces via ETHA on ARTM-F103-STX
192.168.22.40: acces via ETHB on ARTM-F103-STX
SW1-4 Reserved (OFF: default value)
Figure 2-2 Location of PMC Slot on ATCA-F103