Filter
Top Products
32 Micro Motion EtherNet/IP Module
Device Profile
Supported services
Class services:
• Get Attribute Single
Instance services:
• Get Attribute Single
• Set Attribute Single
Class attributes
Instance attributes - Instance/Connection Point 64h
This instance corresponds to I/O Data (Input) in the Micro Motion EtherNet/IP Module. The
EtherNet/IP Module supports two different configurations. Specific input assembly attributes
depend on the configuration in use.
Note
The default input data size is non-zero. The actual size depends on the configuration in use. If
the I/O input data size is set to 0, this instance will NOT be initialized.
# Access Name Type Value Description
1 Get Revision UINT 0002h Revision 2
2 Get Max Instance UINT - The highest initiated instance
number
Configuration
Input assembly attributes
Basic See Section B.3.1
Concentration measurement See Section B.3.5
# Access Name Type Value Description
3 Get Data Array of BYTE - Data produced by the Micro Motion
EtherNet/IP Module