Filter
Top Products
2 Micro Motion EtherNet/IP Module
Before You Begin
Figure 1-1 EtherNet/IP Module with Model 1500 or Model 2500 transmitter
Figure 1-2 EtherNet/IP Module in MVD Direct Connect installation
1.1.2 Communications
The following communications methods and protocols are supported:
• EtherNet/IP Module to Micro Motion transmitter: Modbus RTU on RS-485
• EtherNet/IP Module to Ethernet network:
– EtherNet/IP group 2 and 3 servers
– Web server
– 10/100 Mbit/sec, twisted pair
PLC
EtherNet/IP Module
Transmitter
Other devices
(SCADA, PC, Inverter)
To sensor
PC with Micro Motion Ethernet
Config Tool
Configuration loop
(with configuration cable)
Modbus/RS-485
Ethernet
Web browser
PLC
EtherNet/IP Module
Core processor
Other devices
(SCADA, PC, Inverter)
To sensor
PC with Micro Motion Ethernet
Config Tool
Configuration loop
(with configuration cable)
Modbus/RS-485
Ethernet
Web browser
Barrier