Filter
Top Products
Device Profile
User Manual 39
The specific parameters in the block depend on the configuration in use.
B.3 I/O data
B.3.1 Input assembly for standard configuration
...
32h Get/Set Data Array of USINT Mapped block of Output Data
Configuration
Output parameters (explicit data)
Basic See Section B.3.4
Concentration measurement See Section B.3.8
Byte Access Name Type Notes
0–3 Get Mass flow rate Float
4–7 Get Density Float
8–11 Get Temperature Float
12–15 Get Volume flow rate (liquid
volume)
Float Valid only when Gas Standard Volume is
not enabled.
16–19 Get Mass total Float
20–23 Get Volume total (liquid volume) Float
24–27 Get Drive gain Float
28–29 Get Status word U16 or Word • For Model 1700 Analog, Model 2700
Analog, Model 1500 Analog, Model
2500, and all Series 3000 transmitters:
SNS Status Word 1 (see Section B.7.1)
• For MVD Direct Connect and 9739 MVD
transmitters: SNS Status Word 2 (see
Section B.7.2)
30–31 Get Status word U16 or Word • For Model 1700 Analog, Model 2700
Analog, Model 1500 Analog, Model
2500, and all Series 3000 transmitters:
SNS Status Word 2 (see Section B.7.2)
• For MVD Direct Connect and 9739 MVD
transmitters: SNS Status Word 1 (see
Section B.7.1)
32–35 Get Gas standard volume flow
rate
Float Valid only when Gas Standard Volume is
enabled.