Filter
Top Products
Clean the projector if it becomes dirty or if the quality of the projected
images starts to deteriorate.
Cleaning the Projector's Surface
Clean the projector's surface by wiping it gently with a soft cloth.
If the projector is particularly dirty, moisten the cloth with water containing
a small amount of neutral detergent, and then firmly wring the cloth dry
before using it to wipe the projector's surface.
Attention
Do not use volatile substances such as wax, alcohol, or thinner to clean the
projector's surface. The quality of the case may change or become discolored.
Cleaning the Projection Window
Use a commercially available cloth for cleaning glasses to gently wipe off
dirt from the projection window.
Warning
Do not use sprays that contain flammable gas to remove dirt and dust from the
lens. The projector may catch fire because of the high temperature of the lamp
inside the projector.
Attention
Do not rub the lens with harsh materials or subject the lens to shocks, as it
can easily become damaged.
Cleaning the Air Filter
Clean the air filter and the air intake vent when the following message is
displayed.
"The projector is overheating. Make sure nothing is blocking the air vent,
and clean or replace the air filter".
Attention
•
Dust collecting on the air filter may cause the internal temperature of the
projector to rise, leading to a malfunction or early deterioration of optical
parts. If the message is displayed, clean the air filter as soon as possible.
•
Do not rinse the air filter in water. Do not use detergents or solvents.
Cleaning Parts
108