Filter
Top Products
Notes on using the Network menu
Select items from the top menu and sub menus and change selected items
in the same way as in the Configuration Menu.
However, when you have finished, make sure you select the Setup complete
menu, and select one of Yes, No, or Cancel. When you select Yes or No,
you return to the Configuration Menu.
Yes: Saves the settings and closes the Network menu.
No: Does not save the settings and closes the Network menu.
Cancel: Continues displaying the Network menu.
Soft keyboard operations
The Network menu contains items that require you to enter alphanumeric
characters when you set them. In this case, the following software keyboard
is displayed. Use the [
][ ][ ][ ] buttons on the Remote
Control or the [
w], [v], [a], and [b] buttons on the Control panel to
move the cursor to the desired key, and then press the [Enter] button to
enter the alphanumeric. Enter figures by holding down the [Num] button
on the Remote Control, and pressing the numeric buttons. After inputting,
press [Finish] on the keyboard to confirm your input. Press [Cancel] on the
keyboard to cancel your input.
Each time the [CAPS] key is selected, it sets and changes between upper
case and lower case letters.
Each time the [SYM1/2] key is selected, it sets and changes the symbol keys
for the section enclosed by the frame.
List of Functions
81