Filter
Top Products
Sub Menu Function
Noise Reduction
Smoothes out rough images. There are two modes. Select your favorite setting. Set this to Off when viewing image sources in which noise is very low,
such as DVDs.
Input Signal
You can select an input signal from Computer1/2 input port.
If this is set to Auto, the input signal is set automatically depending on the connected equipment.
If colors do not appear correctly when this is set to Auto, select the appropriate signal depending on the connected equipment.
Video Signal
You can select the input signal from the Video input port. If set to Auto, video signals are recognized automatically. If interference appears in the image
or a problem occurs such as no image is being projected when set to Auto, select the appropriate signal depending on the connected equipment.
Aspect
You can set the
Aspect Ratio
g
for projected images. s p.41
Reset
You can reset all adjustment values in the Signal menu to their default settings, except for Input Signal.
To return all menu items to their default settings, see s p.91
Settings Menu
Sub Menu Function
Keystone
You can correct keystone distortion in the vertical direction. s Quick Start Guide
Zoom
You can adjust Tele/Wide.
Control Panel Lock
You can use this to restrict operation of the projector's Control panel. s p.52
Pointer Shape
You can select the shape of the pointer. s p.46
Pointer 1:
Pointer 2: Pointer 3:
List of Functions
76