Filter
Top Products
F
Start calibration.
Check that the icon is indicating the connected status.
Perform calibration with either Calibrate (Normal) (number of
points: 25) or Calibrate (Advanced) (number of points: 49).
We recommend that you normally use the Calibrate (Normal). Select
Calibrate (Advanced) when higher accuracy is required.
For Windows
Click the icon in the notification area of the taskbar, and select an
item from the menu that is displayed.
For Mac OS
Click the icon in the Dock or Calibrate on the menu bar, and select
an item from the menu that is displayed.
For details on calibration, see s "Calibration" p.61.
G
Click "OK" when the calibration start message is displayed.
H
A dot flashes in the top left of the screen.
If you touch the center of the dot with the tip of the Easy Interactive
Pen, the dot changes from flashing to lit.
Using Easy Interactive Pens p.18
q
Make sure you touch the center of the dot. The dot changes from
flashing to lit even if you touch an area outside of the circle. Since
calibration is performed using the position touched, positioning may
be offset if you touch an area other than the center of the circle.
I
The dots are displayed in order from the top left to bottom
right of the screen.
Repeat step 9 until all of the dots are lit.
Easy Interactive Function (EB-460i/450Wi only)
58