Filter
Top Products
B
Easy Interactive Driver starts automatically.
Use the following procedure to start Easy Interactive Driver if it does
not start.
For Windows
Select Start - Programs (or All Programs) - EPSON Projector -
Easy Interactive Driver Ver.x.xx.
For Mac OS
Double-click the Applications folder of the hard disk volume on
which Easy Interactive Driver is installed, and then double-click the
Easy Interactive Driver icon.
C
The connection status is indicated by an icon.
For Windows
The icon is displayed in the notification area of the taskbar.
<Connected> <Not Connected>
For Mac OS
The icon is displayed in the Dock.
<Connected> <Not Connected>
After the projector and computer are connected, you can use Easy
Interactive Pen to perform the same operations as a mouse on the
projection surface.
q
• It may take a few seconds for the icon to indicate the connection
status.
• If the not connected icon is displayed, check whether or not the
EB-460i/450Wi and computer are connected with the USB cable
correctly.
You may be able to resolve the problem by disconnecting and then
reconnecting the USB cable.
D
Use the following procedure to end the Easy Interactive
Function.
For Windows
Click the icon in the notification area of the taskbar, and select
Exit.
For Mac OS
Click the icon in the Dock or Easy Interactive Driver on the menu
bar, and select Quit from the menu that is displayed.
Easy Interactive Function (EB-460i/450Wi only)
60