Filter
Top Products
Operation Steps
Using Easy Interactive Function for the first time
s p.56
It is only necessary to install the driver and perform calibration the first
time.
1. Connect the computer cable and USB cable, and turn on the computer.
2. Install Easy Interactive Driver.
3 Turn on the projector and start Easy Interactive Driver.
4. Perform position alignment (calibration).
After calibration, Easy Interactive Function is ready for use.
From the second time
s p.59
You can use Easy Interactive Function by just starting Easy Interactive
Driver.
You will need to perform calibration again when you use a computer with a
different resolution or change the projection area.
System Requirements
For Windows
OS
Windows 2000 Service Pack 4 or later
Windows XP Service Pack 2 or later
(Home Edition/Professional)
Windows Vista
*
(All editions except for Starter)
Windows 7
*
CPU
Pentium III 1.2GHz or faster
Recommended: Pentium M 1.6GHz or faster
Amount of Memory
256MB or more
Hard Disk
Free Space
100MB or more
Display
Resolution greater than XGA (1024x768)
*
32-bit versions only
For Mac OS
OS
Mac OS X 10.3.x
Mac OS X 10.4.x
Mac OS X 10.5.x
Mac OS X 10.6.x
CPU
Power PC G3 900MHz or faster
Recommended: Intel Core Duo 1.5GHz or faster
Amount of Memory
256MB or more
Hard Disk
Free Space
100MB or more
Display
Resolution greater than XGA (1024x768)
q
Some settings on the computer may need to be changed to use the
mouse function. See the documentation supplied with the computer.
Easy Interactive Function (EB-460i/450Wi only)
55