Filter
Top Products
When the Indicators Provide No Help
If any of the following problems occur and the indicators do not offer a
solution, refer to the pages given for each problem.
Problems relating to images
• "No images appear" s p.98
Projection does not start, the projection area is completely black, the
projection area is completely blue, and so on.
• "Moving images are not displayed" s p.98
Moving images played back from a computer appear black and the images
are not projected.
• "Projection stops automatically" s p.98
• "The message "Not supported" is displayed." s p.99
• "The message "No Signal" is displayed." s p.99
• "Images are fuzzy or out of focus" s p.99
• "Interference or distortion appear in images"
s
p.100
Problems such as interference, distortion, or black & white checked patterns
appear.
• "The image is truncated (large) or small, or the aspect is not suitable" s p.100
Only part of the image is displayed, or the height and width ratios of the
image are not correct, and so on.
• "Image colors are not right" s p.101
The whole image appears purplish or greenish, images are black and white,
colors appear dull, and so on. (Computer monitors and LCD screens have
different color reproduction performance, so the colors in images projected
by the projector and the colors appearing on the monitor may not always
match, but this is not a sign of a problem.)
• "Images appear dark" s p.101
Problems when projection starts
• "The projector does not turn on" s p.102
Problems relating to monitoring and control
"Mail is not received even if an error occurs
with the projector" s p.102
Problems relating to Easy Interactive Function
• "The message "Hardware device not found." is displayed." s p.103
• "Easy Interactive Pen does not work" s p.103
• "Flashing dots do not appear even if calibration is started" s p.104
• "The dots do not change from flashing to always lit." s p.104
• "The dots change from flashing to always lit automatically" s p.104
Other problems
• "No sound can be heard or the sound is
faint" s p.104
• "No sound can be heard from the
microphone" s p.105
• "The remote control does not
work" s p.105
• "I want to change the language for messages
and menus" s p.105
Problem Solving
97