Filter
Top Products
Sub Menu Function
Reset
You can reset all adjustment values of the Image menu to their default settings. To return all menu items to their default settings, see s p.91
Signal Menu
Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for each
image signal.
You cannot make settings in the Signal menu when the input source is LAN.
Computer image Component Video
g
Composite video
g
/S-Video
g
Sub Menu Function
Auto Setup
You can select whether or not (On/Off) to automatically adjust the image to the optimal state when the input signal changes. s p.100
Resolution
When set to Auto, the resolution of the input signal is automatically identified. If the images cannot be projected correctly when set to Auto, such as
when some of the image is missing, adjust to Wide depending on the connected computer for wide screens, or set to Normal for 4:3 or 5:4 screens.
Tracking
g
You can adjust computer images when vertical stripes appear in the images. s p.100
Sync.
g
You can adjust computer images when flickering, fuzziness, or interference appear in the images. s p.100
Position
You can adjust the display Position up, down, left, and right when a part of the image is missing so that the whole image is projected.
Progressive
(Component Video can only be set when 480i/576i/1080i signals are being input)
Off: IP conversion is carried out for each field in the screen. This is ideal for viewing images with a large amount of movement.
Video: This is ideal for viewing general video images.
Film/Auto: This is ideal for movie films, computer graphics, and animation.
List of Functions
75